MICROMEGA MyZic Series Headphone Amplifier White

A real amplifier for your headphones, because they deserve the same care and attention as your speakers.

It is really easy to use, adjust the volume using the aluminium wheel. The MyZIC goes into standby mode automatically when no signal is being received. A professional quality NEUTRIK jack has been incorporated into the box to guarantee a stable, long-lasting connection.

Audiophile Headphone Amplifier

• 1MΩ analog input to prevent loading source output stage.
• Analog output duplicating analog input to avoid the need for a Y connection.
• MyZIC matches with every headphone impedance and sensitivity.
• Log horizontal rotary control for precise level adjustment. Minimal level detection putting MyZIC in standby mode.
• Out of standby delay to avoid any turn on thump.
• Professional Neutrik headphone 1/4” socket with headphone presence detection. When no headphone is connected,
   MyZIC will remain in standby mode.
• LED status indicator : Red when MyZIC is in standby and White in operation.
• 85 - 265 Vac / 50 – 60 Hz switch mode power supply, designed by Micromega for exceptional sonics.
• Headphone minimal impedance ≥16Ω.
• Gain : 12 dB.
• Very low full bandwidth distortion ≤ 0,005% (20 Hz – 20 kHz).
• Very low IMD SMPTE distortion ≤ 0,002%.
• Full power bandwidth : 10 Hz – 100 kHz ± 0,5 dB.
• Signal to noise ratio > 115 dB A weighted.
• Textured ABS enclosure.

• Net weight : 0.5 kg
• Length : 140 mm
• Width : 150 mm
• Height: 35 mm
• Voltage : 85-150 or 180-265 Vac / 50-60Hz
• Headphone impedance ≥ 16Ω
• Gain : 12 dB for headphone with impédance ≥ 16 Ω.
• Low THD ≤ 0,005% on all audio range

Full Warranty

MICROMEGA MyZic Series Headphone Amplifier White

SKU: MMEGA-90062

MSRP: USD $0.00

Unit of Measure: Each

Note: Sold Only In Canada

Availability: Low Stock ( 2 )

Due to your location, the Add to Cart button has been removed.


Adding to cart… The item has been added

Ask A Question