Creek Audio 4040 A Series Integrated Amplifier Silver
The 4040 A integrated amplifier has been designed to reprise the essence of the original CAS4040 which was launched in 1982 to critical acclaim. While huge technological advances and modern digital features have propelled the 4040 A into the 21st century, it continues to release the same endorphins its ancestor did 40 years ago.
Features & Specifications:
• Power output: 55 W into 8 Ohms, 110 W into 4 Ohms, both channels driven
•
Continuous max output current: >8A, current limited
•
Peak current: >20A
•
THD and Noise: <0.045%
•
Signal to Noise Ratio: 105dBA
•
Frequency Response: 5Hz to 50 kHz, +/-3dB / 10Hz – 20KHz +/-1dB
•
Input sensitivity: 525mV for 55 W into 8 Ohms
• Gain: 32dB or x40
• Crosstalk: >68dB at 1 kHz
•
Pre-Amp Inputs: 2x RCA (unbalanced) and 1x XLR (balanced)
•
Power-Amp Input: Power Amp Direct via a menu option
•
Plug-in Phono options: Sequel mk4 MM Phono. 40 and 50dB gain
•
Digital inputs: 1x co-axial, 1x optical, 1x USB 2.0
•
Wireless: Bluetooth aptX HD
•
Digital to Analogue Converter: ES9018k2m Sabre DAC.
•
Loudspeaker Outputs: 4mm binding posts with rear and side entry, plus a spade lug
•
Speaker output impedance: <0.02 Ohms 20Hz to 20 kHz.
•
Damping Factor: >100 into <0.04 Ohms
•
Headphone Output socket: 6.3mm stereo jack socket for 30 – 300 Ohm headphones
•
Mains input voltage range: 100V to 240V nominal, 50Hz or 60Hz
•
Power Consumption: <0.5W Standby, 5W Idle, 350W Full Power
•
Auto Standby: 30, 60, 120 minutes, or disabled
•
Finish colours: Silver or Black front panel
•
Weight: 2.2kgs (4.85 lbs) net, 3kgs (6.6 lbs) gross (packed)
•
Size W/H/D: 21.5 x 6 x 25.5 cm (8.46″ x 2.36″ x 10”) including feet, knobs, LS terminals and BT antenna.
Full Warranty
