Description
JL Audio E-Sub e110 Powered Subwoofer Black Ash Trade-In
E-Sub™ powered subwoofers apply a series of our key technologies to deliver exceptional sound quality, power and value in a wide range of demanding applications. Inside each E-Sub™, a state-of-the-art, long excursion JL Audio driver combines with a highly efficient, proprietary switching amplifier to deliver astonishing performance from a very compact subwoofer cabinet.
The E-Sub™ driver is an unconventional design, built like no other and requiring very specific production fixtures and procedures. As one of our highest technology subwoofer drivers, it is built by the same team that assembles our flagship W7-HT drivers, and is tested to the same quality standards. E-Sub™ drivers are distinguished by a radical, widely-spaced suspension architecture and a steel structure that forms the outer baffle of the subwoofer enclosure.
Specifications:
Enclosure Type
Sealed
Enclosure Finish
Black Ash
Frequency Response (Anechoic)
25 - 116 Hz (±1.5dB)
-3 dB at 23 Hz / 120 Hz
-10 dB at 18 Hz / 165 Hz
Effective Piston Area (Sd)
58.78 sq in / 0.0379 sq m
Effective Displacement
131 cu in / 2.1 L
Amplifier Power
1200 W RMS short-term
Power Mode
Off, On or Automatic (Signal-Sensing)
Signal Processing
Unbalanced Inputs
Stereo or Mono (two RCA jacks)
Speaker/High-Level Inputs
Stereo or Mono (removeable plug)
Input Grounding
Isolated or Grounded
Level Control
Variable, from full mute to +15dB over reference gain
Filter Mode(s)
Low-Pass
Filter Slope(s)
24 dB/octave
Filter Frequency Range
25 Hz - 130 Hz
Filter Defeat Function
Yes
Polarity
0 or 180 degrees
Phase
Variable, 0- 280 degrees, referenced to 80 Hz
Line Outputs
Stereo or Mono (two RCA jacks), High-Pass or Pass-Through
Physical Specifications
Width (W)
13.5 in / 343 mm
Height (H)
14.24 in / 362 mm
Depth (D)
16.51 in / 419 mm
Net Weight
52.7 lb / 23.9 kg