Parasound ZPhono/XRM Series Phono Preamplifier Black
The Parasound Zphono XRM delivers this must-have list and more! It offers convenient on-the-fly impedance adjustment for MC cartridges, a switchable rumble filter, a stereo-mono switch and balanced XLR outputs. Additionally, many phono preamps use 'wall warts' external power supply that can add noise to the audio signal. Zphono XRM uses a far superior high-capacity, low-noise, linear power supply that won't compromise your music. The XRM gives you, the listener, the best possible opportunity to experience the full emotional content of vinyl. Independent circuits for MM and MC optimize the signal to noise ratio and sonic presentation. Balanced XLR outputs provide optimum rejection of external noise using common mode rejection (CMRR).
The Zphono XRM uses an ultra-low distortion design (<0.02% THD) with ultra high-speed, low-noise op amps plus audiophile grade resistors and capacitors. It is RIAA accurate to within 0.2 dB. Input and output RCA jacks are gold plated. The unique half-rack width chassis (one rack space high) makes the XRM easy to place, especially in custom installations. But don't let the compact dimensions fool you. This is one serious phono stage. The XRM is powerful proof of Parasound’s continuing support of the vinyl renaissance. The Zphono XRM has separate input jacks and circuitry for MM (moving magnet) and MC (moving coil) cartridges. Connect your turntable’s signal cables to the Input jacks on the Zphono XRM that correspond to the type of cartridge you are using. You can connect two turntables simultaneously if one turntable has an MC cartridge and the other turntable has an MM cartridge. You can also use a turntable with two tonearms, provided one is equipped with an MC cartridge and the other with an MM cartridge. The front panel input select switch makes it easy to toggle back and forth between your MM and MC connection.
Features:
- Works with all line drive preamplifiers
- RIAA curve accurate to 0.25 dB
- Ultra-low distortion
- Switchable gain for moving magnet or moving coil cartridges
- Exclusive AC polarity switch to eliminate hum
- Ultra high-speed, low-noise opamps
- Audiophile grade resistors and capacitors
- Gold-plated RCA input and output jacks
- Unique half-rack width chassis; 1 rack space high
Specifications:
Gain at 1 kHz :
MM, 46dB; MC, 61 dB
Input Sensitivity at 1 kHz :
MM, 5 mV in for 1.1 V output
MC, .9 mV in for 1.1 V output
Input Impedance :
MM, 47 k Ω
MC, 100 Ω
Input overload:
MM, 200 mV; MC, 36 mV
Input Capacitance
150 pF
RIAA accuracy:
0.25 dB, 20 Hz - 20 kHz
S/N ratio:
MM, 84 dB
MC, 58 dB
Power requirement:
115 V - 230 V, 60/50 Hz, 5 W
Dimensions:
8-1/2 w x 1-3/4 h x 10 d, 2 h with feet
Net weight: 4 lbs.
Full Warranty
