The Plinius 9100 is an integrated amplifier with a moderate 120-watt output rating, it is also the entry-level model in an extensive range of two-channel and multichannel power amplifiers, integrateds and preamps, some with switchable class A and class AB operation. Exceptionally clear, vibrant, energetic, and realistic, with a balanced warmth. It feels as though genuine instrument sounds are dancing through the air. Visually striking, it is undeniably a remarkable work of design.
Specifications:
-
Power: 120 Watts RMS per channel into 8 Ohms. Both channels driven from 20Hz to 20kHz at less than 0.1% total harmonic distortion.
-
Frequency Response: 20Hz to 20kHz ± 0.2dB. 0dB at 0Hz and -3dB at 70kHz.
-
Distortion: Typically <0.05% THD at rated power. 0.1% THD & IM worst case prior to clipping.
-
Current Output: 20A short duration peak per channel. Fuse protected.
-
Slewing: 50V/us
-
Hum & Noise: 90dB below rated output 20Hz to 20kHz unweighted.
-
Input Sensitivity: 290mV RMS for rated output at 1kHz.
-
Input Impedance: 47k Ohms.
-
Input Overload: 5V RMS
-
Rated Pre Out Level: 1.5V RMS into 47k Ohms or higher.
-
Pre Out Source Impedance: Typically 1.5k Ohms.
-
Pre Out Minimum Recommended Load: 47k Ohms
-
Tape Output Level: Unity Gain at 200mV. Tape loop muting at 5V RMS input.
-
Dimensions: Height 105mm (4"), Width 450mm (17.75"), Depth 400mm (15.75"), Weight 10kg (22lb)
90 Day acX Warranty
