Pro-Ject MaiA S3 Series Integrated Amplifier Black
The MaiA S3 is the all in one solution for your hifi system. Not only the circuit design was reworked, also the case has been significantly changed and the MaiA S3 uses Pro-Ject's new S3 case. Due to the bigger size, they were able to improve the circuit board layout in terms of electromagnetical interference. With its 8 inputs, you are ready for any kind of source device.
Features & Specifications:
| Power output: | 2x 23W / 40W at 8 / 4ohms (1% THD) |
| Frequency response (20Hz - 20kHz): | <-0,5dB @4ohm |
| Channel separation: | - 69dB at 10kHz |
| Signal to noise ratio: | 97dB (101dB-‚A‘ weighted) @4ohm |
| THD: | < 0,04% at 10W / 4 ohms |
| Headphone amplifier: | 2x 75mW at 32ohm (1%THD) |
| Headphone output: | 6,3mm jack (16 – 600ohms) |
| Analogue inputs: | 3x pair RCA, 1x phono MM (RCA) |
| Digital inputs: | RCA coax, 2 x Toslink, Bluetooth 5.0 (aptX) |
| D/A-converter: | Cirrus Logic CS4344 24bit/192kHz |
| Variable output: | 1x pair RCA |
| Speaker connectors: | 4mm Ø banana plugs, spades connectors or naked wire |
| Power supply: | 20V/3A DC;100 - 240V, 50/60Hz |
| Standby Power consumption: | < 0,5 watts |
| Dimensions WxHxD: | 206x55x153 (176mm with sockets) |
| Battery remote control: | 1 x CR2032 / 3V or CR2025 / 3V |
| Weight: | 1070 g without power supply |
Full Warranty
